-
Long range operation via the Command Console [up to 1 km non-line-of-sight]
-
Operating time: up to 8 hrs [mission dependent].
-
Compatible with a wide range of Distuptors.
-
Multiple MESH radio options.
-
CAN, Ethernet and RS232 vehicle communication ports.
-
Close by operation via the Wireless Hand Controller [up to 20 m]
-
Pigstick and Hotrod disrupter firing without ejecting the distruptor.
-
Fail-safe firing circuit.
-
6 colour cameras as standard and 2 auxiliary camera ports.
-
5 Independent spotlights.
-
All joints are protected by clutches in case of crash or fall.
-
Front tracks have dampening system to protect them from crash or falls.
-
Tool Changing Gripper have both power and data port.
-
Rear sliding Tool-bay have both power and data port.
-
Large capacity rear battery drawer can take up to 6 x BB2590.
-
Manipulator arm with 5 degrees of freedom.
-
Turret rotation: 360 degree continuous.
-
Gripper rotation: 360 degree continuous.
-
Arm lift capacity: 13 kg extended, 19 kg half extended and 50kg retracted.
-
Two heavy duty tracks which allow travel over the most difficult of terrains.
Interceptor
Convenience
The Interceptor robot weighs 80 kg with stow dimensions of 730 mm x 444 mm x 440 mm (LxWxH). Interceptor can be put into the boot of a car for quick or discrete transportation. Ability, size and price make Interceptor a cost effective solution for smaller security and bomb disposal units.
Climbing Ability
Interceptor has two heavy duty tracks and an actuator driven variable angle front ramp which allow it to travel over the most difficult of terrains. Interceptor can climb difficult slopes and stairs up to 45°
_PNG.png)
Functionality
Interceptor primary use is security and Explosive Ordnance Disposal (EOD). Interceptor is compatible with multiple disruptors and Interceptor can fire Pigstick and Hotrod disruptors without ejecting the disruptor. Additional functionality can be extended to the Interceptor such as X-ray, CBRN sensors and a Interceptor training simulator.
Training Simulator
A plugin unit can be connected to the Command Console which turns the Command Console into a training environment with simulated onscreen scenarios responding to Command Console control. Thus Interceptor can remain mission ready while the Command Console is used for training.
.jpg)
Control
Interceptor is operated via the Command Console or the Wireless Hand-Controller. The Command Console operating range is up to 1 km non-line-of-sight and 1 km + line-of-sight via MIMO MESH radio link. The Wireless Hand-Controller is ideal for loading, unloading and close-by control (up to 20 m range).
Strength and Power
Interceptor arm can lift 13 kg while fully extended, 19 kg half extended and 50 kg with the arm fully retracted. Interceptor can carry a payload of 50 kg and reach a max speed of 6 km/h.
